Beckhoff ZK4530-0001-0008

Beckhoff ZK4530-0001-0008 Product Details

The Beckhoff ZK4530-0001-0008 is a pre-assembled resolver feedback cable designed for connecting Beckhoff servo motors with resolvers to compatible Beckhoff drive systems. This cable ensures reliable transmission of the resolver signals, which are crucial for precise motor control and position feedback in automation applications.

While the specific details for the "-0008" variant might require referencing the exact datasheet, the ZK4530 series generally represents high-quality, drag-chain suitable cables with specific connector configurations.

Product Parameters (General for ZK4530 Series)

Based on available information for similar ZK4530 models, the following parameters are typical:

• Cable Type: Resolver connection cable

• Conductor Cross-section: Typically 0.25 mm² (e.g., 4 x 2 x 0.25 mm²)

• Jacket Material: Usually PUR (Polyurethane) for drag-chain suitability and oil resistance. PVC and TPE variants may also exist.

• Outer Cable Diameter: Approximately 7.5 mm ± 0.3 mm

• Minimum Bending Radius:

• Moved in drag chain: Typically 10 x outer cable diameter

• Fixed installation: Typically 8 x outer cable diameter

• Maximum Drag-Chain Speed: Typically up to 3 m/s

• Maximum Acceleration: Typically up to 20 m/s²

• Number of Bending Cycles: Typically at least 5 million

• Operating Voltage: Max. 300 V AC (UL), Uo/U 300/300 V (VDE)

• Temperature Range:

• Moved: Typically -20 to +80 °C (-4 to +176 °F)

• Fixed: Typically -40 to +80 °C (-40 to +185 °F)

• Connectors: Features specific connectors on each end. The ZK4530 series often includes an M23 connector on the motor side and a D-sub connector on the drive side. The "-0001-0008" likely specifies the exact pin configuration and potentially the cable length (though "-0008" usually isn't the length code).

• Shielding: Features a shield with a high optical covering factor (typically ≥ 85%) for EMC protection.

• Oil Resistance: Typically oil-resistant according to UL 1581 or DIN EN 50363-4-1.

• Flame Retardant: Typically according to IEC 60332-1.

• Approvals: Often UL and CSA listed, CE compliant, RoHS compliant.

Note: For the precise parameters of the ZK4530-0001-0008, refer to the official Beckhoff datasheet for this specific product code. The "-0001-0008" suffix is crucial for identifying the exact specifications, including connector types and pinouts.

Product Advantages (General for ZK4530 Series)

• Drag-Chain Suitability: Designed and tested for continuous movement in drag chains, ensuring long service life in dynamic applications.

• High Flexibility: Allows for complex and repetitive motion without cable damage.

• Oil Resistance: Suitable for use in industrial environments where exposure to oils and lubricants is possible.

• EMC Protection: Shielded cable ensures reliable signal transmission and reduces electromagnetic interference.

• Pre-assembled: Ready for immediate installation, saving time and reducing wiring errors.

• High Quality and Reliability: Beckhoff is known for its high-quality industrial components, ensuring dependable performance.

• Optimized for Beckhoff Systems: Specifically designed for seamless integration with Beckhoff servo motors and drive systems.

• Various Lengths Available: Although "-0008" isn't likely the length, the ZK4530 series is available in various pre-defined lengths to suit different application needs.